SD2IEC LCD

Horizontal thumbnail SD2IEC LCD 3D Print 194517

Horizontal thumbnail SD2IEC LCD 3D Print 194518

Horizontal thumbnail SD2IEC LCD 3D Print 194519

Shape thumbnail SD2IEC LCD 3D Printing 1505053

Shape thumbnail SD2IEC LCD 3D Printing 1505054

Shape thumbnail SD2IEC LCD 3D Printing 1505052

Prints (0)

No Prints Yet

Be the first to upload a Print for this Design!
Drag & Drop A Photo or
Click To Browse

Description

Summary This is a box for the C64 sd2iec LCD version as found on:http://www.retro-compi.de/index.php/commodore-projekte/sd2iec Feel free to customize it to your needs. For printing, support is needed. There are 2 versions of the bottom plate, one with a retainer for the circuit board, the other one without. In my case the retainer wasn't needed as the board fits snug into the case.

Design Files

File Size

sd2iec_bottom.stl

14.5 KB

sd2iec_bottom2.stl

67 KB

sd2iec_top.stl

103 KB

Comments

Marcello Cruz:

There is a tip to fit this on the SD2IEC? The hardest part is the insert the SD connector on the case cause the reset button is near.

Reply6 years ago

Ruben Coolen:

can you exactly state your issue? you should insert the sd-slot side first and then turn the board into the case. Should be self explanatory...

Reply6 years ago

1 Reply

Ruben Coolen:

if you make the slide opening large enough so the metal part of the sd slot can slide through it you can get it fit easily. do NOT cut the reset button

Reply6 years ago

Marcello Cruz:

Will not do that. I can't slide the SD slot because the reset hit inside the case. What I did was cut the the border inside the case to slide the SD slot. It worked. Thanks for the model.

Reply6 years ago

Ruben Coolen:

You’re welcome

Reply6 years ago

SD2IEC LCD

Prints (0)

No Prints Yet

Description

Design Files

File Size

Comments

Your browser is out-of-date!