Hictop Prusa i3 3DP08 acrylic convertion to 2020 extrusion frame

Prints (0)

Description

Summary The Hictop Prusa i3 Acrylic 3DP-08 printed great for me. Only problem was ghosting on prints with speeds over 60mm/s. So after the great success of my hypercube i decided to also built a 2020 frame and transfer all hardware and electronics over. I have gained 35mm in Z height in the process. I have attached my Sketchup file for those that may want to modify the stuff. I recommend getting you 2020 extrusions from Misumi. They dont charge you per cut and have the right extrusions that have the 6mm channel. They are the best price around anyways too. The fan cover im using is thing 1750976 and the fan duct is thing 510957. i use extruder thing 1099016 BOM for 2020 (3) 440mm (2) 340mm (2) 237mm Whole bunch of M5 bolts and T nuts The "shoes" STL is to be printed with TPU to recude noise, vibrations and printer movement. Print Settings Printer: Prusa i3 Rafts: No Supports: Yes Resolution: .20 Infill: 65% Notes: Printed with ABS using honeycomb infill. Supports where necessary.

Design Files

File Size

Z_T_Brace.stl
43.1 KB
Z_Shaft_Clamp_L.stl
316 KB
Y_Shaft_Clamps.stl
763 KB
Corner_bracket.stl
264 KB
Y_Motor_Mount.stl
1.56 MB
X_Carriage_e3dv6_lj12a34zbx_exp.stl
1.92 MB
lm8uu_holder.stl
276 KB
Z_Motor_Mount_R.stl
1.61 MB
Display_case.stl
928 KB
Cable_tie_2020.stl
845 KB
PSU_case.stl
733 KB
Z_Shaft_Clamp_R.stl
347 KB
Feet.stl
166 KB
Extruder_bracket.stl
495 KB
X_Carriage_Leveler.stl
364 KB
Z_T_Brace2.stl
41.8 KB
Z_Motor_Mount_L.stl
1.59 MB
Shoe.stl
976 KB
Corner_bracket_long.stl
162 KB
Y_Idler_Mount.stl
356 KB
Motherboard_case.stl
2.34 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×