Designed by
killonious
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary This is the Deathstroke mask from Arkham Origins. In this remix I added strap holes to the mask and the back piece. This mask was sized for an adult male. It is 10% larger than the orginal. Note : If you printed the my original Deathstroke mask this back piece will fit it. You will just need to scale this back piece down 10% from what you printed the original. So if you printed the original at 100% the back piece will need to be printed at 90% to be at the same scale.
Design Files
File Size
Deathstroke_Mask_v2_no_strap_holes.stl
34.3 MB
Part_7_v2.stl
4.13 MB
Part_2_v2.stl
2.45 MB
Back_Piece_v2.stl
8.66 MB
Part_8_v2.stl
4.1 MB
Deathstroke_Mask_v2.stl
34.7 MB
Deathstroke_Mask_Mirror_Image_v2.stl
34.6 MB
Part_5_v2.stl
4.09 MB
Part_1_v2.stl
2.6 MB
Part_3_v2.stl
5.01 MB
Part_9_v2.stl
4.53 MB
Part_4_v2.stl
7.81 MB
Part_6_v2.stl
6.22 MB
Part_10_v2.stl
4.29 MB
Comments