![Tiny Whoop X mode 68 mm Polycarbonate 3D Print 107901 Tiny Whoop X mode 68 mm Polycarbonate 3D Print 107901](http://assets.pinshape.com/uploads/image/file/107901/container_tiny-whoop-x-mode-68-mm-polycarbonate-3d-printing-107901.jpg)
![Tiny Whoop X mode 68 mm Polycarbonate 3D Print 107902 Tiny Whoop X mode 68 mm Polycarbonate 3D Print 107902](http://assets.pinshape.com/uploads/image/file/107902/container_tiny-whoop-x-mode-68-mm-polycarbonate-3d-printing-107902.jpg)
![Tiny Whoop X mode 68 mm Polycarbonate 3D Print 107903 Tiny Whoop X mode 68 mm Polycarbonate 3D Print 107903](http://assets.pinshape.com/uploads/image/file/107903/container_tiny-whoop-x-mode-68-mm-polycarbonate-3d-printing-107903.jpg)
![Tiny Whoop X mode 68 mm Polycarbonate 3D Print 107904 Tiny Whoop X mode 68 mm Polycarbonate 3D Print 107904](http://assets.pinshape.com/uploads/image/file/107904/container_tiny-whoop-x-mode-68-mm-polycarbonate-3d-printing-107904.jpg)
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary After requests, here is the version of the classic tiny whoop x 68mm. The light and airy architecture of the 68mm frame has been possible due to the soliditer and stiffness of the polycarbonate. Be very careful in flight with other filaments ;) Frame in polycarbonate 68 mm center distance with a mini flight controller racing evo sp. It is fully configurable and cleanflight on all flights modes FC: http://bit.do/Tiny-32bits-F3-Brushed-Flight-Control-Board-Based-On-SP-RACING-F3-EVO-For-Micro-FPV-Frame Coreless: http://bit.do/Chaoli-CL-720-7x20mm-Coreless-Motor-for-90mm-150mm Recepteur: lemonRx dsmx Props EDF: http://www.rakonheli.com/catalogsearch/result/?q=40mm Camera 25mW: http://bit.do/Camera-TX01-Super-Mini-aio_8G-40CH-25MW-VTX-600TVL Camera 200mW: http://bit.do/camera-Super-Mini-AIO-5-8G-40CH-200mW-VTX-600TVL Lipo 1s nanotech 260mha = 3min flight 8 x M1.6 x 5mm https://www.facebook.com/Microdure/ Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: No Supports: No Resolution: 0.06 Infill: 2.75mm polycarbonate
Comments