Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
I used a a random vector pattern design that I found on on my way to work. The design came from a girl's t-shirt and I found it very intriguing to copy it and make it into an iphone case. I named it 'Distro' because I needed a cool name for it But I am open anyone who can give me a better name. Leave a comment if you think you have a better name :) .
Note: I recommend increasing the infill settings at 100% to increase the strength of the iPhone case.
-----My Configurations Settings-----
Slicer: MatterControl
Printer: Wanhao Duplicator I3
infill setting: 100%
Layer Height: 0.1mm (0.2mm look looks okay as well.)
Raft: Yes (but not recommended)
Print ETA Time: 4 Hours 22 Minutes
HeatBed: yes (not recommended )
Sanding: Yes (if you are using PLA & ABS)
Printer Speed: 40mm/s (I recommend something slower so that the curves extrude correctly and accurately )
--- Support 3D Creator ---
If you would like to help me create more cool things and remake stuff, or buy me coffee that would fuel my creativity to do so, you can by clicking here .
Comments