Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
-
Drag & Drop A Photo or
Click To Browse
Description
[¯`·._.·[ V3.5 RC CAR 1:8 JLB CHEETAH DIRECT DRIVE STEERING ]·._.·´¯]
JLB CHEETAH V3 is the Updated version of the V2.0 and V2.5
All parts are compatibles between V2.0 and V2.5 and V3 (rétro compatibility)
No need to reprint everything.
This is the complete JLB CHEETAH V3 printed version, ready to run.
(i will also make a separate kit to update V2 / V2.5 to V3 with direct drive, steering.. )
Lucky hasard It's now compatible with Aliexpress metal steering linkages 105mm
New DIRECT DRIVE STEERING SYSTEM
New Steering Cup Hubs and linkages (+metal Linkages 105mm)
New Chassis
BUILD GUIDE :
https://docs.google.com/presentation/d/1jabhHdwHruR_a4ibou3fMm3Z3C0JivmusydT-Vo3oH4/edit?usp=sharing
BUILDING VIDEO LINK :
PREMIUM VERSION GOT :
New DIRECT DRIVE STEERING SYSTEM
New Steering Cup Hubs and linkage
New additional Battery Side Mount
New Slim / Medium / Wide / Extra Wide Chassis
New Body Mount + upper protection
All Type Motors Mounts D36 D42 D49++
All RIMS Sizes and offsets STL kit
DUAL Motors Capability PLA or Metal
DUAL Motors Transmission Cover PLA or Metal
Big ESC Hobby wing Max8(6S) or Max6(8S) Dual Place Capability
FPV Protection
Lower Protection Pate
Gopro mount
More adjustment holes
Fresh Update and Upgrade
Thanks from the creator
PREMIUM LINKS :
Official website
Upgrade by more Need :
New DIRECT DRIVE STEERING SYSTEM (10 parts to switch easy named)
New Front Hub carrier and steering cup hub (HEAVY redesign)
Absorber shock(holes for direct Drive protection not obligatiry)
Same V2.5
Lower and Upper arms(place for washers)
All the Steering Ackerman system(more efficient/stronger)
Servo Mount and Cover(5mm side offset)
Link piece(if servo mount change)
New protection plate
Anti Roll bar (better design) and Rear mounts(only)
Transmission cover(maximized)
Motor mount (more stronger)
No changes or Minor changes :
New Chassis center section (wider) + little more steering angle + Correction
Chassis brace(4 holes)
Arms mount rear and front
Chassis differential housing and cover
Bumpers(led reinforced ans place for screws lower arms mount)
Rims 3.2p 2.2p 1.9p(more stronger)
Receiver mount(slimer)
Anti Roll front mounts (no changes)
NEEDS :
- TPU ( 500g )
Arms
Bumpers
- PLA Plus ( 1Kg )
All the Rest
TOOLS :
Hallen H2.5mm(for M3 Screws) / H1.5(for Pinion)
Long Nose Pliers
ThreadLocker
Grease
Clamp Gaskets
HARDWARE STORE :
Rolling 6800ZZ ABEC 7 ( X 8)
Metal Steering Linkages105mm ( X 2)
Washers M3 ( X 100)
Lock Nuts M3 ( X 100)
Screws
M3 x 5mm Hexa ( X 8) (MotorMount)
M3 x 8mm Hexa ( X 10 (Direct drive Steering)
M3 x 14mm Hexa ( X 10) (Steering Cup Hub or Ackermann Steering)
M3 x 16mm Hexa ( X 1) (Ackermann Steering)
M3 x 20mm Hexa ( X 60) (ALL THE REST)
M3 x 35mm Hexa ( X 2) (Ackermann Steering or 40mm)
M3 x 40mm Hexa ( X 24) (ARMS)
TAGS :
- JLB CHEETAH
- Ender 3 compatible
- PreOriented STL PARTS
- 3D Printed RC Car
- Ackermann Steering Compact System or direct drive steering
- Full Metal transmission
- Metal Steering Linkages Compatible 105mm
- Brushless Motor 3650 up to 4268 (3650 min recommended) (soon 4985 and 5687 $$$)
- 3S -4S - 6S
- DUAL3S = 6S / DUAL4S = 8S / DUAL6S = 12S (soon DUAL8S = 16S $$$)
- ESP Front Gyroscope
- Pinion and Gearing 0.8 Module (32 Diametral Pitch) - No cogging issues
- Metal Differential mechanism Central axis Central drive shaft Motor-Gear
- Printed Beadlock Rims 2.2p or 3.2p -No Balooning issues for 3.2p
- Dogbones Haxa 17mmm
- Strong modulable design easy replace
- Standards Parts
- 4 Arms = 1 Arm (Lowers and Uppers)
- 4WD -2WD -4x4 -2x4
- With or Without Anti roll Bar
- 1:8 Hardware
- No Glue Only M3 Screws Washers and LockNuts
- LED Light System Front and Rear
- Drift
- GoPro Mount
TAGS:
RC car, jlb, 1:8, 4WD, Ender3, CHEETAH
Comments