Prints (0)

Description

They are here!

The small and greenish finally arrived. And this time it is for real!

The invasion has begun and there's no place to hide, because they are awesome!

The wheels spins and the capsule opens and closes.

Ready to print without supports in FDM printers.

---

PLA

Layer height 0,2mm for all pieces except the alium.stl, that should be a little more fine, like 0,15 or 0,12.

Print speed 40mm/s

alium.stl should be printed slowly! Too many details to rush the printer ;) about 20mm/s or less

The capsule is printed at once. There will be a 0,3mm gap between both parts so you can unstick them (there is a bridge in this file, prepare your active cooling!)

There is an extra capsule in 2 parts that fits together for those that can't put the main capsule working ;)

For the wheels, you should print the tires in flexible filament (it will work great!)

There is an extra file where the tires and the rims are fused together, for those that don't have flexible filament or don't want to have trouble fitting them to the rims.

I hope you have fun with them. Expect no mercy...

Design Files

File Size

UFHO1.zip/4wheels(flex_fil).STL
703 KB
UFHO1.zip/capsule.STL
140 KB
UFHO1.zip/capsule_2parts_to_assemble.STL
135 KB
UFHO1.zip/vassel_upper.STL
308 KB
UFHO1.zip/4Axis_4Rims.STL
1.72 MB
UFHO1.zip/4wheel_and_axis.STL
2.48 MB
UFHO1.zip/alium.stl
978 KB
UFHO1.zip/schematics.jpg
364 KB
UFHO1.zip/vassel_lower.STL
56.6 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×