Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
3D MODEL DESCRIPTION
Robust support for mounting 1 or 2 Graphic cards outside the cabinet for mining, exhibition, ventilation, or space purposes.
Both Graphic card and Risers are supported on a flat surface, allowing the use of screws for a more complete fixation (list of screws below). This avoids the long-term consequences of 24/7 vibrations: heating of the contact region and even fire.
You can mount this support with up to 3 fans (120mm)! Save your graphic card fans, the lower the temperature, the longer your equipment lasts.
Keep everything organized! If you have more than two graphic cards, you can still connect one support to the other by the side docking system, joining them completely using a screw.
The bottom has space to stick silicone or rubber feet.
Designed to be printed in either PLA or ABS. ABS is recommended depending on the operation temperature.
No support required.
Assembling tutorial: https://www.youtube.com/watch?v=oftSA5VmKog&ab_channel=3DTROOP
List of screws: -> Fixing the graphic card: 2x M3.5-12mm -> Fixing the riser support to the main support: 1x M4x12mm -> Union between two supports: 1x M4x12mm -> Fixing the Risers on the support: 8x M3x16mm Reference for silicone feet: 3M Scotch Bumpers 8mm x 8mm x 2.5mm
Please feel free to share the images of your print in your setup, that would be great!
This is a personal use license, if you want to sell the printed parts from this design in your region, please get in contact.
Don't forget to hit like and follow us! Every week we will be posting new models for you! 3D PRINTING SETTINGS
Dimensions(mm):209,9 x 180,0 x 134mm Layer heigh: 0,2mm Walls: 2 Infill: 15% Material: PLA or ABS No support required. Base speed: 50mm/s Printing time: ~10h 27min
Comments