Jack O' Coaster (6 Face Designs!)

Hello everyone! For this Halloween, I had a number of guests visiting and needed something for them to put their drinks on. I came up with the solution to design and print off my own coasters rather than purchasing some from the store - which ended up being cheaper too! 

The coaster has several different face designs that can be printed separate from the background color (backing plate) and the frame. This allows for a multitude of different color combinations. 

Print Settings: (0.4mm nozzle, 80mm/s overall speed, Slicer: Ultimaker Cura 4.8) Wound up going with a lower quality as I needed to print a lot of them out quickly. Still turned out good looking. Of course, you can lower the layer height and line width settings and get a higher detailed model.

Frame, Stem, Backing Plate, & All Faces: 0.3mm layer height, 0.5mm line width, 2 walls & 3 top & bottom layers, 10% zigzag infill, 80mm/s print/infill speed, 45mm/s top/bottom speed, 50mm/s outer wall speed, 60mm/s inner wall speed, no support needed, skirt only. Printed in Matterhackers PLA. 

Assembly Video Link: https://youtu.be/7k5BaReIhsg

Designed using Fusion360 | M3D Designs - 2021