Egyptian Gate

Prints (0)

Description

**Disclaimers**

- All non terrain models in pictures are of Games Workshops Intellectual Property.

- This is my first full design set.

- All prints have only been done on a filament printer, at this point in time I have no info on how well it will print with resin.

 

Thank you for looking at my first design set! This modular terrain will help you play out your tabletop games with an Egyptian feel. The goal was to have a design that would be reminiscent of how some Egyptian buildings would look in a non ruined state closer to the time they were built. I went with simplicity as much as I could, and I hope you enjoy it in your siege battles and other campaigns like I will. 

All terrain is painted as follows:

  • Base coat white spraypaint
  • Base layer Citadel Screaming skull
  • Light wash with Citadel Agrax Earthshade
  • Dry brush with Citadel Eldar Flesh

I look forward to pictures and feedback if you decide to buy this product!

All prints were with the following specs unless otherwise noted:

Printed on Creality Ender 3 Pro

All models should be rotated correctly to how I printed them. Almost all are support free, a few are pre supported.

Sliced in Cura with following settings (can use the standard setting for .2mm layer height, and adjust the specific settings below):

  • .4 mm nozzle
  • .2 mm layer height
  • 7% infill, line pattern
  • 30 mm/s speed
  • ironing on (I) or ironing off (NI)
  • Brim bed adhesion (Brim) (optional on all, needed when noted)

This is the following breakdown of each piece, material weight, and time:

Gate

  • Gate Behind Left        79g  13:41  (I)
  • Gate Behind Right      79g  13:46  (I)
  • Gate door left bot       9g  1:53  (NI) (Brim)
  • Gate door left top       9g  2:05  (NI) (Brim)
  • Gate door right bot     9g  1:56  (NI)  (Brim)
  • Gate door right top     10g  2:09 (NI)  (Brim)
    • clip the supports on the gate hinges, and trim top hinges as needed to fit and stay in place on gate.
  • Gate sup left bot        96g  14:12  (NI)
  • Gate sup left top        59g  9:16  (NI)
  • Gate sup right bot      96g  13:52  (NI)
  • Gate sup right top      59g  9:13  (NI)
  • Gate top                    51g  11:06 (I)
  • Gate top overhang      20g  4:13 (I)

Design Files

File Size

gate top.stl
11.1 MB
gate top overhang.stl
5.43 MB
gate sup right top.stl
19.1 MB
gate sup right bot.stl
16.7 MB
gate sup left top.stl
11.3 MB
gate sup left bot.stl
13.1 MB
gate door right top.stl
12.8 MB
gate door right bot.stl
4.54 MB
gate door left top.stl
12.8 MB
gate door left bot.stl
4.54 MB
gate behind right.stl
5.52 MB
gate behind left.stl
5.49 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×