Animal Crossing Leaf - Switch Game Case

This case can hold up to 10 Switch Games and measures approx 1.0 x 4.75in. It requires six 6x3mm magnets to secure the two halves together (The link to the ones that I used is below). This file is designed to be printed on an FDM machine (I used an ender 3) and is actually designed to be multicolor. Print the inset first and then switch materials to print the top. The rings built into the file should keep the parts centered while slicing, as well as serving as a purge block between colors. I used Atomic Filament's Reprap Green and Pine Green.

Tips: While printing, make sure your bed stays heated while you are switching filaments. Make sure you are not using supports - This model does not require them. If you are using a skirt, make sure the distance from the model is not greater than 3mm.

https://www.amazon.com/gp/prod...