Olympic Weight Plate storage pin rack mounted

This is a rack mounted Weight Pin to store your plates on, it is designed to have either a M16 or 5/8 bolt ran through it. Its different from my other design as this one can be printed laying flat. You can tap these for the bolt or just run the bolt in to the print, keeping in mind that will be tough but will create a basic nylon locking nut inside the print so the bolt won't slip out.

If you want these printed for you, check out my Etsy Shop here

See my Video here for more info

3D printing settings

Print laying flat on the bed, use a large nozzle, .8mm minimum, do not use PLA, it will not hold up.