Designed by
Yan87
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Praga V3S, old CzechoSlovakian truck, used by civilian and military. A legend among trucks, nowadays the oldtimer.
Scale 1/10
3D model is print-ready, it contains many parts, for which there will be needed SCREWS M2x10 and M2X6 approx. 30x pieces each or more, and NUTS M2 approx. 20x pieces. Model is designed without the need for bearings or any other materials(except screws), but there are few other formats, so you can modify it by your liking, even can be easily modified for RC.. Not one part is bigger than 22cm, so you can easy print on Ender3 or Prusa or any other printer..
The total length is approx. 70cm when assembled 1/10 scale
If needed to scale the model, or make some modification or improvement, feel free to send me a message, i will gladly help. Native format is f3d- Fusion 360, i can send them if needed (here is limit 100MB, orig files are 300MB)
Design Files
File Size
door_handle_inside_right.stl
66.5 KB
door_handle_left.stl
90.5 KB
door_handle_right.stl
90.5 KB
lift-trailer_connector.stl
91.1 KB
rail_bearing-addon.stl
125 KB
rail_connector_left (1).stl
81.4 KB
rail_connector_right.stl
81.4 KB
cooler_V2 (1).stl
743 KB
handle_type2--2x needed.stl
78.1 KB
hinge_cabin_left.stl
55.1 KB
hinge_cabin_right1.stl
55.1 KB
hand_connector_1.stl
115 KB
kabina_konektor (1).stl
102 KB
cap.stl
63.7 KB
lift_rod.stl
77.2 KB
dobos--11x needed.stl
1.57 MB
steering_rotator_left.stl
113 KB
steering_rotator_right.stl
113 KB
pole_small_1--3x needed.stl
99.9 KB
sidewall_front.stl
91.5 KB
sidewall_left_2_1.stl
90 KB
sidewall_right_1.stl
89.5 KB
reserve_holder.stl
84.2 KB
steering_rod_holder.stl
131 KB
rear_wheel_beam2.stl
684 Bytes
floor_right_1.stl
199 KB
ground_driver.stl
48.5 KB
holder.stl
48.5 KB
seat_driver.stl
6.04 MB
X_connector.stl
259 KB
rail_bearing-addon (1).stl
114 KB
cap (1).stl
63.7 KB
beam_right_2.stl
230 KB
hook_1.stl
169 KB
hook_2.stl
156 KB
beam_right_3.stl
223 KB
instrument_table.stl
478 KB
top_cap_V2.stl
103 KB
bearing_holder.stl
122 KB
bearing_holder2.stl
122 KB
cabin-beam_connector_left (1).stl
427 KB
door_left.stl
1.44 MB
door_right.stl
1.44 MB
fender.stl
843 KB
door_handle_inside_left.stl
66.5 KB
bumper.stl
82.1 KB
bumper_holder.stl
42.7 KB
bumper_holder1.stl
42.7 KB
cabin_V2.stl
22.5 MB
seat_codriver.stl
6.04 MB
sidewall_left_1_1.stl
89.5 KB
frame_left--4x needed.stl
40.1 KB
sidewall_right_2.stl
90 KB
pole_back_1--2x needed.stl
110 KB
pole_midle_right.stl
38.4 KB
sidewall_rear.stl
218 KB
rear_wheel_holder.stl
323 KB
board_top_right_front.stl
15.8 KB
steering rod.stl
60.8 KB
board_top_right_rear.stl
15.7 KB
floor_left_1.stl
199 KB
floor_left_2.stl
192 KB
pin--4x needed.stl
684 Bytes
board_middle--8x needed.stl
15.4 KB
board_top_left_front.stl
15.7 KB
board_top_left_rear.stl
15.8 KB
hinge_cabin-hood1.stl
88.9 KB
hinge_cabin-hood2.stl
88.9 KB
hinge_cabin2_left.stl
55.1 KB
hinge_cabin_right2.stl
55.1 KB
hinge_doorcabin_1_LEFT-M2x6.stl
129 KB
hinge_doorcabin_1_RIGHT-M2x6.stl
129 KB
hinge_doorcabin_2_LEFT-M2x6.stl
105 KB
hinge_doorcabin_2_RIGHT-M2x6.stl
105 KB
hinge_hood+M2x4.stl
56.1 KB
hood_V2.stl
4.58 MB
beam_left_1.stl
162 KB
beam_left_2.stl
223 KB
beam_left_3.stl
209 KB
beam_right_1.stl
138 KB
cabin-beam_connector_left.stl
427 KB
chasis_connector_1 (1).stl
44 KB
chasis_connector_1.stl
44 KB
hand_1_left.stl
226 KB
hand_1_right.stl
226 KB
hand_2_left.stl
77.8 KB
hand_2_right.stl
77.8 KB
hand_connector_1 (2).stl
115 KB
lift_bighand.stl
56.5 KB
lift_bighand2.stl
56.5 KB
lift_rodWhole.stl
101 KB
lift_smallhand.stl
76.4 KB
lift_smallhand2.stl
76.4 KB
rail_1_left.stl
255 KB
rail_1_left_2.stl
255 KB
rail_1_right.stl
255 KB
rail_1_right_2.stl
255 KB
rail_connector_2 (1).stl
80.7 KB
rail_connector_left.stl
80.7 KB
rear_trailer_hollder.stl
77.8 KB
T_connector_left.stl
109 KB
T_connector_right.stl
109 KB
T_front_connector.stl
81.5 KB
T_front_connector_right.stl
81.5 KB
big_tank_right.stl
561 KB
gas_tank_left (1).stl
544 KB
gas_tank_left.stl
544 KB
lamp1 (1).stl
350 KB
lamp1.stl
350 KB
engine_cover.stl
45.4 KB
ground_codriver.stl
40.4 KB
bar--4x needed.stl
3.79 KB
frame_right--4x needed.stl
39.3 KB
hinge_1--20x needed.stl
97.7 KB
pole_1--8x needed.stl
102 KB
front_wheels_beam.stl
243 KB
floor_right_2.stl
192 KB
handle_rear--2x needed.stl
54 KB
handle_type1--4x needed.stl
43.6 KB
pole_midle_left.stl
38.4 KB
gear.stl
305 KB
pneu--11x needed.stl
11.8 MB
rear_wheel_beam.stl
684 Bytes
steering_wheel.stl
852 KB
rear_wheel_holder_right.stl
323 KB
volan_rod.stl
97.3 KB
wheel_heart--11x needed.stl
865 KB
wheel_holder--2x needed.stl
124 KB
Comments