Designed by
Hokur Kil
![Nighthawk 250 LED Motor Mount 3D Print 36366 Nighthawk 250 LED Motor Mount 3D Print 36366](http://assets.pinshape.com/uploads/image/file/36366/container_nighthawk-250-led-motor-mount-3d-printing-36366.jpg)
![Nighthawk 250 LED Motor Mount 3D Print 36367 Nighthawk 250 LED Motor Mount 3D Print 36367](http://assets.pinshape.com/uploads/image/file/36367/container_nighthawk-250-led-motor-mount-3d-printing-36367.jpg)
![Nighthawk 250 LED Motor Mount 3D Print 36368 Nighthawk 250 LED Motor Mount 3D Print 36368](http://assets.pinshape.com/uploads/image/file/36368/container_nighthawk-250-led-motor-mount-3d-printing-36368.jpg)
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
The motor mount may allow to use 5mm diodes for position-locating and flight direction of the Nighthawk. There are no extended screws needed. It's possible to use the same as delivered in the kit. It's designed for MT2204 2300KV motors and is suitable for PLA. I recommend to redrill careful all holes. This download contains 2 STL-datas. You will need to build 2 of each one to complete it. for more informations check data names and the last picture
Used PLA, 1.75 diameter filament, 2 shells, 50% infill, .20 height.
Design Files
File Size
LED-Motor-Mount_Nighthawk_FL_RR.stl
685 KB
LED-Motor-Mount_Nighthawk_FR_RL.stl
689 KB
Comments