Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
I wanted a holder for my two bottles. I have a 2oz. bottle of the Insta-Cure+, and a 2oz. bottle for the Insta-Set. They are a good combination for bonding PLA parts.
Because I have a crowded desk, they get moved around all the time. I wanted a holder to make them easier to move, keep them together as a set, and avoid tipping them over.
This is not exactly a remix of the holder by flying_pig. I did like some design elements. His use of fillets, and positioning of the bottles, and design of the base.
The Parametric Bottle Support was heavily modified for this design. I liked the use of columns to create openings so you could see the label of the bottle. I changed the size, and shape of the large oval .stl. I modified the top of the openings to be arched. I thought this would reduce the need for bridging.
https://www.buymeacoffee.com/U...
Thank you for showing your support and buying me a cup of coffee!
Overall the design works great. If anything the base could be smaller since the two bottle make for a large enough support area.
Does not need supports for printing.
Comments