CEL robox

by CEL

13 Reviews

5 star
4 star
3 star
2 star
1 star
Avatar small By smlinco on Dec 28 2019
Robox Review

This is my first foray into 3D printing. This printer makes it easy to get up and running. Some great things about it include: 1) the basic mode is very straightforward, 2) advanced mode lets you get into almost every setting, 3) auto filament detection is great - it even estimates the cost of the object you’re printing. I haven’t tried dual material printing yet but look forward to it. The quality is relatively good, but prints take quite a while. If you want a basic printer to start learning on, this one’s great. 

Avatar small By ian rossenrode on Dec 09 2019
Mixed feeling but impressed overall

I've had my CEL Robox for a few years now and although I have had a number of different issues with printing and  I took it to the guys near Bristol and upgraded to the Dual material print Head,  just over a year ago when I had a major problem, (which was largely my fault for trying to fix it myself...). Overall it is a good printer, well made (especially for schools), and quite easy to set up and print. There are cheaper printers out there, but for the price this one has been well designed and has a lot going for it... and the customer support and response is very good. (For the record - I have a good friend who is in charge of a university 'fab lab', with a number of different (PLA and SLA) 3D printers and he tells me that they are constantly dealing with the issues that I have experienced, so it would seem that my 'problems' have not been unique to my printer). I have 'experimented' with a range of PLA brands - which may have also been the root of some of the issues I've had - some have been trouble-free while others not so... Very recently I purchased two PLA's I've not tried before and right now, (after trying different heat settings), I have some very successful results.... In summary - I would recommend this printer to those starting out.

Small tdc square By christhirteen on Feb 12 2019
Cheap and cheerful (by comparison)

Software and smart reels makes it incredibly easy to use, track and maintain. Any issues get attention/resolution quickly by customer support.

Avatar small By PCWeber on Jun 13 2018
I'm a very newbie but I'm liking my CEL

I'm only starting to print and am quite delighted with my results. I brought the RBX01 second hand with maybe one use for a very reduced price. In my limited experience printing 3d I've been able to print various objects that I have downloaded fairly well. I'm still experiencing growing pains but the simplicity of this printer does compensate.

I've not had to use anything to assure that my model pieces did not stick to the surface of the heated bed, and I printed some very small pieces indeed. 

I started out slow since I hadn't immediately found the instructions included on a usb card. Once I went through the calibration routines I found that it was quite simple to print a model. The software that runs this printer is downloadable from the CEL website and is Linux friendly.

I'm very happy with my purchase and hope to be using it for several years. 

Avatar small By daveeaston on Nov 29 2017
Easy to set up and use

Excellent print Quality 

Avatar small By Zearan on May 31 2017
Small with bad parts cooling

It is very "plug and print" compared to other 3d printers, and it usually produces good prints, but I would not recommend it. It is too small (in the z axis especially), the print parts cooling sucks, the Automaker software feels restricting to use, it is slow, and it is noisy. 

Small 11822281 10154070808874746 8395740087038123608 n By grant_mackenzie on May 30 2017
Easiest to use 3D printer on the market

I run a hub and own a few 3D printers from a number of well known and less well known manufacturers. My five Robox 3D printers are by far the easiest to use and certainly the best looking. Results with PETG filament in particular are the best I've seen. 

Small 12107758 10205174675187094 8197691292101676716 n By terry_taylor on May 30 2017
Robox (Kickstarter Edition)

I have been very happy with this printer. There were some "teething" issues with the first Kickstarters, but CEL's support has been very good. I did the dual material upgrade myself and it went flawlessly!.

Product build quality is VERY good and support (both from the company and the user community) is Excellent.

Avatar small By jamestoogood on Oct 20 2016
Love My Robox

A fantastic printer, was printing with in 20mins of opening the box, very easy to use with many automated features such as bed levelling taking the chore of setting up away from the user and letting you get on with designing and printing. would highly recommend to anyone wanting a no hassle printer .

Avatar small By TAZIE on Oct 30 2016
Exellent Printer

Excellent printer compact design and easy to use. Support from CEL is second to none and easy to contact with a lot of Q/A available online. Regular software & firmware updates, models are very good with little or no clean up. I am very satisfied with this printer and would recommend it to anyone thinking of purchasing one, the price is good to.

CEL robox Prints 37

Pin img 20151127 162338 1
Small ffibkryhepvqke Small ffibkryhepvqke martin_vaněček
Bow Tie
Pin img 20151211 200126 1
Small 20160709 115142 Small 20160709 115142 els_meulendijks
BonMammam Candle holder
Pin ffibkryhepvqke
Small ffibkryhepvqke Small ffibkryhepvqke martin_vaněček
Bow Tie
Pin img 20151221 232659 1
Small me004 small Small 20160709 115142 els_meulendijks
Aria the Dragon
Pin img 20151217 201120
Small 20160709 115142 Small 20160709 115142 els_meulendijks
Small jointed Reindeer
Pin img 20151218 121952 1
Small 20160709 115142 Small 20160709 115142 els_meulendijks
Santa Yoda
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now