![View jerrycon's profile jerrycon's avatar](http://assets.pinshape.com/uploads/user/avatar/27409/small_059_thumb_large.jpg)
Blast Off - 3D Printed by jerrycon
1038
Printer Used
My Rating
My Thoughts
Designed in Creo and then Meshmixer to make this hollow, printed easily no supports on the outside of the model just underneath on the inside (you might get away with no supports at all)
Settings
Print Time
1
hr(s)
10
min(s)
Material Brand
tiertyme
Material Type
Abs
Material Rating
Layer Height
0.15
mm
Extrusion Temperature
265.0
°C
Infill %
30.0
%
Supports
Yes
Comments