![View CollectorCNC's profile CollectorCNC's avatar](http://assets.pinshape.com/uploads/user/avatar/59855/small_Round_Logo.png)
Elite Knight - Dark souls - 3D Printed by CollectorCNC
![Elite Knight - Dark souls 3D Print 16959 Elite Knight - Dark souls 3D Print 16959](http://assets.pinshape.com/uploads/print_image/file/16959/container_File_000.jpeg)
2405
Printer Used
My Rating
My Thoughts
Really cool model, and it has great detail. The shield should probably be flipped over so it's right side up. This model should be printed in pieces to optimize the clarity of the print. As a single print there are a lot of areas that require support underneath very thin walls so removing support becomes tedious and painful especially with PLA. I would recommend using software to split the model into pieces that can be joined after printing for best results.
Settings
Print Time
9
hr(s)
42
min(s)
Material Brand
MeltInk
Material Type
PLA
Layer Height
0.24
mm
Print Speed
55.0
mm/s
Extrusion Temperature
195.0
°C
Infill %
16.0
%
Supports
Yes
Comments