The Smurf - 3D Printed by Sonny Rivas
2165
Printer Used
My Rating
My Thoughts
I had to manipulate the design a bit to get it to print on a FDM. I'm sure on an SLA printer you will get a perfect print. Still came out really good considering I still tweaking the settings on my Rostock Max V3
Settings
Print Time
10
hr(s)
2
min(s)
Material Brand
Hatchbox
Material Type
PLA, PLA+
Layer Height
0.1
mm
Print Speed
40.0
mm/s
Extrusion Temperature
200.0
°C
Infill %
20.0
%
Supports
Yes
Comments