![View Dr.Zeus's profile Dr.Zeus's avatar](http://assets.pinshape.com/uploads/user/avatar/15784/small_bRe7A5b.png)
Elephant - 3D Printed by Dr.Zeus
![Elephant 3D Print 1286 Elephant 3D Print 1286](http://assets.pinshape.com/uploads/print_image/file/1286/container_IMG_20150813_171346.jpg)
![Elephant 3D Print 1287 Elephant 3D Print 1287](http://assets.pinshape.com/uploads/print_image/file/1287/container_IMG_20150813_133611.jpg)
![Elephant 3D Print 1288 Elephant 3D Print 1288](http://assets.pinshape.com/uploads/print_image/file/1288/container_IMG_20150813_133605.jpg)
![Elephant 3D Print 1289 Elephant 3D Print 1289](http://assets.pinshape.com/uploads/print_image/file/1289/container_IMG_20150813_132627.jpg)
![Elephant 3D Print 1290 Elephant 3D Print 1290](http://assets.pinshape.com/uploads/print_image/file/1290/container_IMG_20150813_132621.jpg)
1883
Printer Used
My Rating
My Thoughts
Very clean design! Great that legs move right away. Only issue I had for the print was the front legs were stuck to the head and I had to use a knife to cut them free, but no other issues!
Settings
Print Time
3
hr(s)
Material Brand
Einstart
Material Type
PLA
Layer Height
0.15
mm
Print Speed
50.0
mm/s
Extrusion Temperature
195.0
°C
Infill %
30.0
%
Comments