CAT ARMOR - 3D Printed by jtrezzo
4988
Printer Used
My Rating
My Thoughts
Quite difficult to print - many of the walls were too thin to print and left some gaps, others were only printable with a smaller nozzle. Would like to see some of the thin walls fixed so that this doesn't happen. Should at least be printable by a 0.4mm nozzle. But - love the results anyway! Cosmo is now ready for battle!
Settings
Material Brand
MeltInk and Hatchbox
Material Type
PLA
Layer Height
0.2
mm
Print Speed
45.0
mm/s
Extrusion Temperature
210.0
°C
Infill %
25.0
%
Supports
Yes
Comments