The Huntress v1.2 - 3D Printed by fantasygraph
1993
Printer Used
My Rating
My Thoughts
easy print BUT you need a layer height of 0.18mm or less because some overhangs ( 2 smalls) are on the limit of the 45degres. you can glue a bit of extruded filament to make the string of the bow (see pictures)
Settings
Print Time
6
hr(s)
30
min(s)
Material Brand
generic
Material Type
ABS 1.75MM
Layer Height
0.18
mm
Print Speed
60.0
mm/s
Extrusion Temperature
210.0
°C
Infill %
10.0
%
Comments