StarChaser - 3D Printed by fantasygraph

The total time is for the bust + 2 x half-star (3h for the figurine, 1h15 for the full star) . the print of the figurine is a bit long because you need to let cool each layer when you are at the arms that are the only difficult part. If you use a Fan, it can be less long. Use the function to move z between each layer to not let the extruder touch the print when it move (of 1 layer height, for slic3r, it's called 'Lift Z' , in 'printer setting' tab, 'extruder'section, 'Retraction' sub section. printed with repetier-host and experimenal version 1.2.6 of Slic3r. The pictures are from a raw print (without modification or sanding) , with one layer of gold paint, then a layer of black paint (with a airbrush). For the star i use a mix of yellow and orange . the details (pipes on suit and visor) are silver paint with a brush