Summary1/10 scale rims for the Truggy. They need to be scaled up 10x. They fit a set of tires I got on ebay for $12, but the rims did not clear the chassis so I designed these. They are 62mm outside diameter, 29mm deep on the front and the rear is deeper. They will need support to print and I used a two layer raft printing these.InstructionsPrinted 10x on a Kossel Delta with support on a 2 layer raft. The perimeter layers are four and same for top and bottom, 0.3 layer. Fill is 50% hex. I used Slic3r.