DIY ASTON MARTIN VANTAGE GTE SWD Steering Wheel by SimWheel Designs

DIY ASTON MARTIN VANTAGE GTE SWD steering wheel for your simulator.

310mm long

There is the possibility of ordering FRONT PLATE and HUB PLATE in .dwg to cut in CNC

If you want sticker you send me an email to 

Included MAGNETIC PADDLE SHIFTER

PARTS REQUIRED:

M3x15 Hex Socket Button Head Cap Screw (12) M6x55/60 Hexagonal Countersunk Flat Head Screws (3) depends QR to use M3x25 Hexagonal Countersunk Flat Head Screws (4) to screw pcb leobodnar M3x20 Hexagonal Countersunk Flat Head Screws (6) to screw cover buttons M4x30 Hex Socket Button Head Cap Screw (2) to screw levet to base shifter 10*3mm Neodimium Magnets (4 OR 8) Micro Lever Switches AC 125 1A (2) M2x12 Hexagonalt Head Screws(4) M2 Nuts (4) M3 nuts (14) M4 nuts (2) M3x4 Brass Inserts (8)  12mm Plastic Push Button Switch Self-locking / Momentary Switchs (12)  PG7 Black Plastic Waterproof Cable Glands Joints (1)  Plum handle 15mm rotary encoder coding switch / EC11 (5) on bottom encoders  70mm Quick Release Leobodnar BU0836A-NC 12-Bit Joystick Controller No Connectors  Leobodnar BU0836A Break out Matrix board  PRINT SETTINGS:

0.4 Nozzle / 0.2 - 0.18 Layer / 75%+ Infill

CC - Attribution - Non-Commercial - No Derivatives

You cannot sell the digital model, a derivative or adaptation of the model, nor can you sell prints of the model and design.

FOR PERSONAL USE ONLY - NON COMMERCIAL - NOT FOR RESALE

COPYRIGHT SIMWHEEL DESIGNS - ALL RIGHTS RESERVED

0.4 Nozzle / 0.2 - 0.18 Layer / 75%+ Infill