Car Battery Tester

Car battery tester, this model was designed for an Ø20mm car cigar lighter plug, or it can be glued on a bigger one. this design is made for an 23x10mm current tester and a 6x6x4,3mm switch / four pins. 

a button is intended to stick on it.

Rafts:No

Supports:Yes

Resolution:0,2

Infill:20%

Filament: PLA

Notes:

Print flat - need supports - infill at 20% print time: 2h17 - PLA=2,53m; weight: 8Gr

--> For the button: print at 0,1 / no supports needed.