I use these to film YouTube videos. Print what you need and assemble. I mostly used 5/16th inch threaded rod, nuts and bolts . Some 1/4 inch carriage bolts are used for camera mount threads if needed. I used pennies in the counterweights but sand, lead shot, washers, BBs or anything else will do. Use supports for the knobs with nut cutouts. Tap the nuts in with a hammer or press them in with a vise. The bases fit into one inch bore dumbell weights. The weight holes vary a lot. You may have to shim or you can use the expanding plug I designed. 5/16 inch rod can be bought in three foot lengths for about $4. 2 inch long 5/16 inch bolts and nuts are a few cents each. I buy them by the pound for $3 a pound.
Loading prints...
Mini Boom YouTube Audio Visual Mount System
Creative Commons Attribution-NonCommercial-NoDerivatives
You can download and share as long as you credit the creator, but you cannot change the material or use it for commercial purposes.
Licensed under CC BY-NC-ND
Files Included
14 downloadable files:
Loading comments...