Airsoft AR15 AEG body kit. V 2.4 3rd revision

Description

With this you can print yourself an AR-15 body kit to make or customize your airsoft gun. You will need version 2 gearbox, long shaft motor and hopup unit. Thit project is long big and kinda expensive (for me).  Main parts and almost everything else is designed to be print completely without or with minimum supports possible. NOTE that is still a work in progress and minor changes will be made, Since only 3 people including miself have printed this and gave a feedback. I do not reccomend you to expect this without any shortcomings. And i will gladly accept your help in mitigating any if you found them. If we end up with bunch of different lower recievers each for some specific gearbox brand that's only good. So If you want to help me tweak it until it's logically done PM me. Even if you are not planning in printing it but find it interesting I

would also like to have discussion about it. Here is a link to a discord server . https://discord.gg/DPYEGvH.

You also can download and request some files there.

These parts require no suppots:

Lower reciever, magazine release, magazine release button, pistol grip, pistol grip screw, bolt imitation, dust cover.

Set of goals!

1 no supports if possible.

2 Lighten the parts and avoid wasting material.

3 parts interchangeability with standard of the shelf stuff

4 No more than 12 print hours per part

5 220x220x220 build volume INSTRUCTIONS! After printing the parts clean up areas with overhangs. Depending on brand of your gearbox you may need to sand down protrusion on the back inner face of lower reciever.

Correct printing orientation shown on picture with green parts.

Design Files

File Size

ar15_upper.stl
2.63 MB
left_boltr.stl
55.7 KB
dust_cover.stl
160 KB
charging_handle.stl
785 KB
ar15_upper_1deg_angle.stl
2.63 MB
ar15_lower.stl
5.33 MB
rear_pin.stl
35.8 KB
mag_release_center.stl
91.1 KB
charging_handle_spring.stl
88.8 KB
fire_selector.stl
124 KB
front_pin.stl
192 KB
mag_catch2.stl
82.9 KB
mag_release_catch.stl
165 KB
selector_ring.stl
42 KB
bolt_imitation.stl
77.2 KB
screw.stl
1.66 MB
base_plate.stl
3.17 MB
Grip.stl
32 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×