I have been fixing the windshield sprayers on my car and found some issues. One is the old broken gasket that it needs under the sprayer to keep it in place. I decided to just make it myself and here it is. Both sides are exactly the same and you will need two. I started making it out of PLA, but the final version I used ABS since this is small enough of a part. Don't use PLA for this, PLA will melt or just deform like a noodle in the heat outside. This may also fit a few other years after, but I don't know up to which year, but if your car has the same type like mine did, then I don't see why it shouldn't work. I can only tell you which car I made this for.