This is an Obrez Pistol (from the Mosin Nagant). Its the design from Battlefield 1.
The trigger and loading rail are working (you can pull the handle up_back_forward like a real carabine to load and press the trigger to release the pin)
All you need to build this is:
- 3D Print
- 1 rubberband
- A spring from a pen
- 4 screws + nuts(Depending on the size you are printing this!!!!!)
- 100% scale model*: 1x: 10x3mm screw, 2x: 14x3mm, 1x: 25x4mm
- 140% scale model*: 1x:14x4mm screw, 2x: 20x4mm screw, 1x 35x6mm screw
* the 100% scale version fits on a 20x20cm buildplate (eg. Ender 3), it fits your hand fine, but is not the original size.
*the 140% scale needs a 30x30cm buildplate (eg. CR10), I had no chance to print it, because my printer is to small (really want feedback for this)
I tried to take pictures of the assembly
If you have problems or questions just ask.
Hope you enjoy
Loading prints...
Obrez Pistol (working!!)
Creative Commons Attribution-NonCommercial-NoDerivatives
You can download and share as long as you credit the creator, but you cannot change the material or use it for commercial purposes.
Licensed under CC BY-NC-ND
Files Included
10 downloadable files:
Loading comments...