This is my Counter-top Herb Garden It has three removable pots, a drip tray and a height adjustable light. I've got mine plugged into a timer to keep the light on the right amount of time every day. It's designed to print without any supports. The slopes on the inside of the pots and in the mid support of the base are fairly aggressive but don't worry if you get a few dangling pieces of plastic there you won't be able to seem them once it's all put together. I printed everything with 2 shells and 10% infill. Make sure you use at least two shells on the drip tray so it doesn't leak. Everything should click together fairly firmly, but I recommend glueing the back bar into place once you've test fit everything. Fresh herbs make all the difference in cooking.