Prints (0)

Description

This is a Glidecam inspired by the Devin Graham signature series.

Features:

  • Adjustable head
  • Movable gimbal
  • Quick release plate
  • adjustable lenght
  • Extendable base plate (if lasercut)

The Parts are 3D printed, but you will need some other part:

  • 2 bearing (for in the arm)
    • Outer diameter: 8 mm
    • Inner diameter: 5 mm
  • 2 bearing (for the grip you will hold
    • Inner diameter: 8 mm
    • Outer diameter: 15 mm
  • 1 bearing (for one the tubes)
    • Inner diameter: 25 mm
    • Outer diameter: 37 mm
  • 20 mm diameter aluminium tube
  • 15 mm diameter aluminium tube
  • 110 mm long 5 mm thread + 1 normal nut and 1 seal nut ( for adjusting the head)
  • 70 mm long 6 mm thread + 1 normal nut and 1 seal nut ( for adjusting the head)
  • 4 mm thread  + 1 nut ( for securing Quick release plate + 8x 3D printed bottom)
  • 8 mm thread + 2 nuts ( for securing head on tube + 9x for the base plate DXF)
  • DXF Files for baseplate: https://www.thingiverse.com/th... (Pinshape doesn't support DXF Files)

if you lasercut the base plate:

  • 8x 6 mm threads + nut (can be wing nuts for easy of use or 3d printed nop)

Picture shows where part needs to be relative from each other. (only the printable part are in the picture).

List of 3d printed Parts:

  • Balance_Lower_Part (part of head)
  • Balance_Upper_Part (part of head)-Bottom_Main
  • Bottom_Side (print 2x)-Bottom_Attach ( Glue in 15 mm Tube)
  • Centre 
  • Centre _Top
  • Gimbal_Arm
  • Gimbal_Clamp
  • Gimbal_Clamp_Handle-Handle_Gimbal
  • Head_Attach ( Glue in 20 mm Tube)
  • Lower_Tube_Holder
  • Pipe_Jam_Nut V2
  • Pipe_Jam_Bolt
  • Quick_Release_Bolt
  • Quick_Release_Plate
  • Thumb_screw_Nop 5mm (for one the head)
  • Thumb_screw_Nop 6mm (for one the head)
  • Tube_jammer
  • Tube_To_Head 
  • Tube_To_Head_Small
  • Weight_Plate_Nops (instead of wing nuts)

Design Files

File Size

Thumb_screw_Nop 5mm.stl
1.87 MB
Pipe_Jam_Bold.stl
246 KB
Head_Attach.stl
231 KB
Balance_Lower_Part.stl
956 KB
Balance_Upper_Part.stl
228 KB
Base Plate Nop.stl
2.17 MB
Bottom_Attach.stl
142 KB
Bottom_Main.stl
1.39 MB
Bottom_Side.stl
499 KB
Centre.stl
247 KB
Centre_Top.stl
664 KB
Gimbal_Arm.stl
1.16 MB
Gimbal_Clamp.stl
1.39 MB
Gimbal_Clamp_Handle_Edges.stl
2.3 MB
Gimbal_Clamp_Handle_Round.stl
2.52 MB
Gimbal_Spacer_10mm.stl
127 KB
Gimbal_Spacer_6mm.stl
101 KB
Handle_Gimbal V2.stl
213 KB
Handle_Gimbal.stl
213 KB
Lower_Tube_Holder.stl
336 KB
Pipe_Jam_Bold V2.stl
246 KB
Quick_Release_Bold.stl
151 KB
Quick_Release_Plate.stl
948 KB
Thumb_screw_Nop 6mm.stl
1.17 MB
Tube_Jammer.stl
1.15 MB
Tube_To_Head.stl
199 KB
Tube_To_Head_Small.stl
146 KB
Weight Plate Nops.stl
774 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×