It has a red, green and blue 3W LED which can be adjusted from each other.
By adjusting the distance between them a different light effect can be created.
Also this may come in handy when using different sizes of lamp shades.
I also made a little set peace, because I had trouble keeping the red arms (LED holders) in place. The wire I used is not flexible enough :-).
I have two different kind of gray outer body’s. One with a bottom and one without. The one on the pictures is the one without a bottom.
*outer diameter is 148mm
Printed in gray and red ABS
If you are interested in making your own LED driver you may like:
https://pinshape.com/items/40366-3d-printed-adjustable-led-base &
https://pinshape.com/items/40378-3d-printed-simple-led-driver
Loading prints...
LED base 3 x 3W
Creative Commons Attribution-NoDerivatives
You can download, share, and use commercially, but you cannot change the material in any way or use it to make something new.
Licensed under CC BY-ND
Loading comments...