This is a cap for memory sticks. There is a key-chain loop attached. The usb key fits all the way in.
Notes:
I printed this with the Anycubic i3 Mega, at 0.06 mm layer height. It may need supports on the inside. I used line supports and pulled everything out with tweezers. It fits the USB tight so you might want to push one in hard and pull it out a couple of times before regular use. If it printed correctly you should be able to push the USB all the way inside. I used AutoCAD to draw the design. I made measurements using a caliper and made several prototypes and tweaks to the design before it was perfect.
Dontations:
I am a student studying engineering. If you would like to help support me and my projects please feel free to donate. I hope you find use in my designs.
Bitcoin Address: 3MA5mzKyuB433pSj4Wwbx537Aezcx3Y6F5
Thanks!
Loading prints...
USB key cap
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Files Included
1 downloadable file:
Downloaded: 157 times
Loading comments...