Twisted Tower

Prints (0)

Description

A twisting tower standing on a very unnatural hill. You can print the tower and the base separately, or whole thing at once. Either way no supports are necessary. I would recommend printing the tower slower and with lower layer height. Also for the stairs it's recommended to use higher infill to support the steps, and/or many top layers. 

My print with 15% infill and 4 top layers had some small gaps.

Design Files

File Size

twisted_tower.stl
16.9 MB
twisted_tower_base_02.stl
18.3 MB
twisted_tower_merged.stl
27.6 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×