This G-Gauge/Gauge-1 Thomas model is based on my previous S-Gauge Thomas model, but tweaked and upscaled! https://pinshape.com/items/35664-3d-printed-thomas-the-tank-engine-thomas-friends

Please take a look at my "Making of.." video of the small S-Gauge:

The large model took about 52 hours to print and is made out of 400gr PLA

Subscribe or follow me on:

Instagram: www.instagram.com/agepbiz

YouTube: www.youtube.com/user/agepbiz

Twitter: www.twitter.com/agepbiz

3D Printing Settings:

thomas_g_chassis rotation: as modelled raft support 15% infill 0.1mm 2 shells

thomas_g_base rotation: standing raft support 15% infill 0.1mm 2 shells

thomas_g_body raft support 10% infill 0.1mm 2 shells

thomas_g_lamps rotation: laying on back no raft support 30% infill 0.1mm 2 shells

thomas_g_roof rotation: standing raft support 15% infill 0.1mm 2 shells

thomas_g_ladder rotation: laying on back no raft no support 100 infill 0.1mm 2 shells

thomas_g_wheelwell rotation: laying on back side no raft no support 15% infill 0.1mm 2 shells

thomas_g_wheel no raft no support 30% infill 0.1mm 2 shells

thomas_g_whistle no raft support 100% infill 0.1mm 2 shells

thomas_g_bar no raft no support 25% infill 0.1mm 2 shells

thomas_g_face rotation: standing raft support 25% infill 0.1mm 2 shells

thomas_g_spacers no raft no support 100% infill 0.1mm 2 shells