Summary I printed Neildon's cover, but my board was about 1-2mm wider than his. Since it didnt worked, i modified it to fit my board (holes spacing are the same), added some supports for the LCD itself and made channels for the nuts to lock from the back. I also opened the bottom corner, because my ribbon cables were thicker and slightly wider than his. Then i edited the back cover to be cooler since im a huge Iron Man fan. The rear cover doesnt need bolts for me, they are snug and holds cover in very nicely. Print Settings Printer: Hictop Prusa i3 Rafts: No Supports: No Resolution: 0.20 Infill: 15%