Snowstock Delta Bot

Prints (0)

Description

Summary I wanted to build a wolfstock style delta-bot, using Makerslide linear slides. But, I wanted to run the belt through the inside of the Makerslide for a cleaner look. This is still very much a work in progress, I'm currently working on completing the design and building the printer. I'm posting a build log on my blog: http://andy-projects.blogspot.com/2013/12/delta-bot-build.html http://andy-projects.blogspot.com/2014/01/delta-bot-build-part-2-belt-tensioners.html http://andy-projects.blogspot.com/2014/01/delta-bot-build-part-3-effector-rods.html http://andy-projects.blogspot.com/2014/04/delta-bot-build-cooling-fan-magnetic.html 1.1.2014 Update: -added belt clip, bolt to back of makerslide carriage -added belt tensioner to idler bracket -added tensioner arm 1.15.2014 Update: -Added carriage mount for rod ends -Added platform (intended for budaschnozzle but lots of mounting holes for anything) -added rod sleeve (for reinforcing end of carbon rods) 1.18.2014 Update: -updated platform and rod carriage mount to improve fit with traxxas rod ends 1.19.2014 Update: -updated platform and rod carriage mounts to allow better clamping of traxxas rod ends including variability in rod end center width 3.19.2014 Update: -added shroud for 40mm fan -added bowden tube mount for Budaschnozzle -added 5mm spacer for Budaschnozzle -added platform for magnetic bearings -added carriage mount for magnetic bearings 4.03.2014 Update: -added M5 threaded rod end caps for magnetic bearings 9.8.2014 Update: -added upper and lower braces to stiffen structure. 5.15.2016 Update: -added new versions of the platform and sliders to give more clearance to tie rod ends -added improved fan shrouds, two versions 12.26.2016 Update: -designed RAMPS mount to neatly attach RAMPs and Arduino to bottom of platform. I added this as a new thing: http://www.thingiverse.com/thing:1997781 -added improved fan shroud -added mount for 12mm diameter inductive or capacity proximity sensor for auto-bed leveling Post-Printing

Design Files

File Size

Rod_Carriage_Mount_REV6.STL
394 KB
Upper_Brace_REV1.STL
279 KB
8.5mm_carbon_rod_endcap_M5_Threaded_REV1.STL
91.6 KB
Budaschnozzle_spacer_5mm_REV1.STL
180 KB
idler_mount_REV4.STL
1.27 MB
NEMA_17_Motor_Mount_REV3.STL
934 KB
Tensioner_Arm_REV1.STL
342 KB
Rod_Carriage_Mount_REV3.STL
534 KB
budaschnozzle_bowden_tube_hot_end_mount_REV1.STL
288 KB
Platform_REV5.STL
1.88 MB
40mm_fan_shroud_angle_REV3.STL
1.07 MB
inductive_sensor_mount_REV1.STL
134 KB
40mm_fan_shroud_angle_REV1.STL
1.06 MB
40mm_fan_shroud_REV4.STL
794 KB
Upper_Brace_mirrored_REV1.STL
279 KB
Lower_Brace_REV1.STL
284 KB
Lower_Brace_Mirrored_REV1.STL
284 KB
Rod_Carriage_Mount_Magnetic_Bearing_REV1.STL
608 KB
Platform_Magnetic_Bearing_REV1.STL
915 KB
Platform_REV3.STL
645 KB
Rod_Carriage_Mount_REV4.STL
409 KB
8.5mm_carbon_rod_sleeve_REV1.STL
20 KB
Belt_Clip_REV2.STL
38.5 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×