DJI Mavic Pro Clone

Prints (0)

Description

Summary NOTE - UPDATED VERSION AVAILABLE ON http://diyrc.co.uk A couple of the photos are from the updated version (LED's at the back). Following on from my Inspire Clone I decided to have a go at the DJI Mavic.. This time it's a little different as I actually have one to measure and compare with so the clone is even better this time. I've tried to make this an easy print with no support required, all items are rotated ready to print. Please visit my website for updated versions, build logs and more.... Printed at 0.3 / 30% for speed, although it does seem very strong I'll drop this down to 0.2mm / 30% for final print.

Design Files

File Size

Leg_back_left.stl
80.8 KB
Bottom.stl
258 KB
Top_front.stl
65.6 KB
Leg_back_right.stl
80.8 KB
Feet_left.stl
28.8 KB
Leg_front_left.stl
109 KB
Nose.stl
150 KB
Feet_right.stl
28.8 KB
Leg_front_right.stl
109 KB
Feet_rear.stl
27.8 KB
Middle.stl
145 KB
Top_Back.stl
17.7 KB
Catch.stl
12.2 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×