vibro-bug on the 3D printer.

Summary

http://www.instructables.com/i... To build the vibration bug you want to print the body of the robot of the future, download files in STL format. From the details you'll need The vibration and the battery CR2032. A small piece of foil and tape, as well as lighter. First you need to be heated with a lighter foot beetle and bend them so that the beetle could melt them and was similar to the present. Always make sure that all of the clutches 8 coke surface. The vibration is then to be inserted in a special groove on the bottom of the chassis and push wire into the hole. After one of the wires have to be wound a small piece of foil to improve the contact with the battery. Insert the battery into the opening, so that the negative battery downward. Now, with the help of a small piece of adhesive tape anchoring second posting to minus batteries. ALL robot works, put it to the surface, and it begins to move! Put like, subscribe - you do not hard and I am happy :) Link to vibration is: https://ru.aliexpress.com/item... 2114.13010608.0.0.DJwGAJ Print Settings Printer: reprap Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15 How I Designed This