Summary Remixed from the PLA Wrist Brace. Please note I am not a veterinarian and this thing serves only to show concept of design. Please consult your local vet if your pet is injured. Instructions: -Print with PLA or other low temp filament to allow for post printing thermoforming -Print flat with strap loops on the upper surface. I did not have to use support structure. -You can form the shape by dipping the part in boiling water for a few seconds or using a hairdryer to heat the part. Once heated the part becomes malleable for a few seconds. I formed the shape by hand and test fitted to the shape of the cats leg. I repeated the process as necessary, dipping in only the area I wanted to shape in the boiling water. Print Settings Printer Brand: RepRap Printer: Prusa I3 MK2 Rafts: No Supports: No Resolution: .2mm Infill: 90% Post-Printing Instructions: -Print with PLA or other low temp filament to allow for post printing thermoforming -Print flat with strap loops on the upper surface. I did not have to use support structure. -You can form the shape by dipping the part in boiling water for a few seconds or using a hairdryer to heat the part. Once heated the part becomes malleable for a few seconds. I formed the shape by hand and test fitted to the shape of the cats leg. I repeated the process as necessary, dipping in only the area I wanted to shape in the boiling water. How I Designed This Fusion 360