Summary
This is a mounting adapter for the E3D BigBox to mount a PanelDue.
The adapter is designed to fit where the original LCD is located.
To mount the PanelDue I used four M3 screws with a fine thread normally used to mount components in a computer case.
Nylon washers under the screws are recommended!
Desinged with Onshape (https://cad.onshape.com/documents/c5c1fd333b46af1490c4a1cc/w/1570f7e015d95b93847a9d1f/e/c599abe0d675276356970b3d)
Print Settings
Printer:
BigBox Dual Rafts:
No Supports:
No Resolution:
0.2mm layer, 0.4mm nozzle Infill:
20%
Loading prints...
E3D BigBox - PanelDue 4.3'' Mounting Adapter
0
likes
0
collections
Tags:
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Loading comments...