Nexus 6 Charge Cradle

Summary Designed for a 70mm OD, 10mm thick Qi charger like the blue ringed Qumox, this is a landscape desk cradle for a Google Nexus 6. The arms attach using an octagonal fitting allowing the angle to be changed (note the 'spanner' ends are different to give a greater range of adjustment); in theory you can get increments of 11.25 degrees. Instructions Print the parts as provided here, particularly the cradle on end. You may need support for the cradle, but I got away without on a Da Vinci 1.0. 0.2mm layers, 3 perimeter, 33-50% fill. I used a 3mm, 0.5mm thick brim to guarantee bed adhesion.