No Prints Yet
Be the first to upload a Print for this Design!
This downspout cover will help to filter out leaves and other large debris all year 'round, allowing your house's gutter to more efficiently drain the rain water. This model fits into tight corners and is rectangular to fit under braces, as depicted in the photos.
*STANDARD model = https://pinshape.com/items/284...
*SQUARE model = https://pinshape.com/items/284...
Universal size fits most residential rain gutters which come in either 5 inch or 6 inch openings.
[The typical 5 inch K-style gutter comes with 2 inch x 3 inch downspouts. A larger, 6 inch residential rain gutter system would consist of a 6 inch K-style gutter, using a 3 inch x 4 inch downspout.]
Dimensions of this EXTENDED corner Gutter Downspout Filter are:
6 inches width, 3 inches depth, 2 1/2 inches height *5 inches height with stabilizer tube (tube = 1 3/8th x 1 1/8th)
PLEASE print in ABS only -- Please DO NOT print in PLA -- ABS can withstand prolonged moisture, water, cold and heat. PLA can not.
The models depicted were printed in ABS with:
- .3 micron/primary
- 35% infill
- 2 perimeter layers
- 3 top and bottom layers