This is compatible with all frames with 4.8*9.7 (distance from outside of hole to outside of hole) holes and power supplies with 12.5*8.6 (distance from outside of hole to outside of hole) holes
I needed to attach my Power supply to my Sintron prusa i3, so I decided to create a support/adapter that fitted the Sintron acrylic frame holes in the side.
The support/adapter is reservable so it will fit both the right and the left side of the printer after printedand.
Print Settings
Rafts:No
Supports:No
Resolution: .3
Infill:15% is the minimum I recommend
Wall Thickness: 3layers (top, bottom and sides)
Change Log: (dd/mm/yy)
27/08/16
- Updated with 2mm thicker design for better accommodation of the mounting screws
- Added STL's with different heights for mounting the power supply higher up
Loading prints...
PSU Support/Adapter for Sintron Prusa i3
Creative Commons Attribution-NonCommercial
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution to the creator.
Licensed under CC BY-NC
Loading comments...