SummaryI finally got a sweet Panasonic 1760 production monitor for my workbench so I made a cable holder to mount to the side. It's designed for BNC cables but will work with others as you can see. I've uploaded a left and right side version and they should also work on the 1710 monitor (and probably others). The red version shown was printed at Shapeways, check it out if interested: http://shpws.me/nRYRInstructionsThis will work with or without a protective cover installed and you will need an M4 screw 8-10mm long. I would recommend using threadlocker as well. Print with 1-2 shells and at least 20% fill.