Destiny - Vex Eye

Prints (0)


Tell fellow guardians the tale of your path through the Vault. Show them this eye, ripped from a fallen goblin, as proof of your triumph. 

Uses one CR2032 coin cell, three red 3mm LEDs, and wire. Soldering skills recommended - see photos for assembly guide!

Lens is printed in Formlabs Clear resin, 'nubs' are printed in Formlabs Flexible resin, and the remainder of the parts are printed in White. 

To achieve a smooth finish, sand parts with 150 grit then wet sand 800+ grit to desired finish. Lens was wet sanded to 2000 grit on the front and 320 on the back

Primed with a standard gray primer, then painted with Rustoleum Metallic Rust:

Design Files

File Size

Small Nub.STL
4.08 MB
Front Ring.STL
10.7 MB
Outside Ring.STL
16.5 MB
Inside Ring.STL
21.8 MB
Back Cap.STL
2.87 MB
Clear Ring.STL
141 KB
Large Nub.STL
4.25 MB
1.07 MB
5.31 MB


Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now