SummaryThe LittleRP FlexiVat For those with a filament printer, here a fully functional Flex Vat for LittleRP DLP. Aditional Materials: 8pz. 1/8 x 1/2 STD screws. 4 pz. 1/8 x 1" STD screws 4 pz. 1/8 x 1" 1/2 STD screws to install on Little RP. 16pz 1/8 STD nuts. FEP film from: http://projectsinterestsandetcetera.com/store/#FEP-Film 2mm. EVA foam from any craft store or stationery. Use a cutter to cut and shape EVA and FEP film. Use a punch papper to make holes on EVA foam and FEP film. More iformation on: http://www.buildyourownsla.com/forum/viewtopic.php?f=19&t=4867 The LittleRP FlexiVat was inspired on the excellent work of HTL. http://projectsinterestsandetcetera.com/Print SettingsPrinter: Da Vinci 1.0Rafts: NoSupports: NoResolution: 0.2 mmInfill: 50%Notes: Print with PLA DO NOT USE ABS. For the upper vat container its very important to print with 4 shell thickness and 100% infill at slow velocity to ensure waterproof. For the rest of parts, use 3 shell thickness and 30% infill at medium velocity.