SummaryIMPORTANT: Due to scaling problems in the software I am using I had to export all pieces into one STL file, this means that in order to print out the eyeball you have to print out a complete sett at first. Iam sorry for the issue this might cause, after doing this you have to separate the models from each other and deleting the once thats not needed, I printed my model in 0.15 scale. I have not been able to fix this problem and I am really sorry for this. I decided to make a four piece 3D-Model of the logo of the ever so famous youtuber jacksepticeye, and here it is. Set contains of 1 stand, 1 eyeball 1 iris and 1 pupil. It should be minimum of clean up required in order make the pieces fit, and the pieces will often fit without the need for any glue, but this is Depending on your printer settings and quality The model is a medium poly model. Hope you enjoy it! and I might be making a new version later. Also, if you would like you can se the accual printing of this model here: https://youtu.be/QYKPTqDdLvgInstructionsPrinted it with green, blue and black ABS at about 240 Celsius and between 60 and 100% infill because of some infill issues( I don't have any fancy smansy printer) and but them all together in the end of course :P what did you think? I made this model in a software by the name Maya, I am not a professional user of Maya, but dude to my education I am using it sometimes. It took about one hour to make the basic mesh of the 4 pieces. I dont have the track of time after that.