MakerTron_prinPLA-Kit2 (Kit2)

Prints (1)

Description

MakerTron-prinPLA-Kit2(Kit2)

It is motivated by CHAPPIE(Movie) and Syd Mead's Works(Maybe you do, too).

It is kit'2'. Kit1 is here. :-)

https://pinshape.com/items/11996-3d-printed-makert...

===========================

Kit2 is a simple model of the entry level.

But it has the ability to respond to various situations.

For example, It can be clean up the dog poop, light up the birthday candles and  etc... :-)

===========================

I like the traditional modeling methods that control vertex.

My models are optimized for 3D printing(especially FDM printers).

MY Print Slicer(Cura) Setting:

  • Layer Height : 0.2mm
  • Shell thickness : 1.2mm
  • Bottom/Top thickness : 1.2mm
  • Fill Density : 20%
  • Print Speed : 50mm/s
  • Support type : Everywhere
  • Platform adhesion type : Raft

Filament Type : ABS(Natural)

The gap is optimized, but the polishing-processing or some bonding may be required, depending on your printings.

And I provide PICtart - Lithophane App(Android).^^ You can make your lithophane easily with PICtart.

Design Files

File Size

mt_prinpla2_Lleg.STL
298 KB
mt_prinpla2_pelvis.STL
78.9 KB
mt_prinpla2_pins.STL
95.4 KB
mt_prinpla2_Rarm.STL
583 KB
mt_prinpla2_Rfoot.STL
209 KB
mt_prinpla2_Rhand.STL
583 KB
mt_prinpla2_Rleg.STL
298 KB
mt_prinpla2_headpart.STL
305 KB
mt_prinpla2_Larm.STL
583 KB
mt_prinpla2_Lfoot.STL
209 KB
mt_prinpla2_Lhand.STL
583 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×